Olivier Colombo - Consultant & Corporate Advisor
My Blog

Pinkebike.com: Leatt Introduces New Apparel Line

Pinkbike.com: Leatt Introduces New Apparel Line:


The top-of-the-line long-sleeved jerseys are breathable, yet are windproof and water resistant to fight the effects of the weather. The laser-cut, tape bonded seam construction of the four-way stretch fabric is tailored specifically to wear with or without body armor. Additional features include laser-cut ventilation holes, brush-guard reinforcement on elbows, and a silicone printed tail that grips to pants.

DBX 4.0 Ultraweld Jersey

• Ultra-light, 4-way stretch, MoistureCool wicking fabric
• Brush-guard reinforcement on elbows
• Collar design works with or without a neck brace
• Athletic stretch fit for riding with or w/o body armor
• Silicone inside jersey grips to shorts/pants
• Zipper pocket with microfiber goggle wiper
• Tape-bonded seams for maximum comfort with bar task stitch for critical reinforcement


According to Leatt, the shorter-sleeved, lighter jerseys are breathable, light and stretchy. The three-quarter and T-sleeved versions all share the jerseys’ features, including the unique neck brace compatible collar construction, an integrated lift ticket pocket and a wipe for your glasses or goggles.

DBX 3.0 Short Jersey

• MoistureCool wicking stretch mesh fabric with air channels
• Three-quarter length sleeves
• Overlock stitched seams for comfort
• Dollar design works with or w/o a neck brace
• Stretch fit for riding with or without body armor
• Pocket with microfiber goggle wiper


The DBX 5.0 Jackets are made of a three-layer HydraDri shell that is laser-cut and fully seam taped. They have a waterproof rating of 20,000/20,000mm (withstands very high pressure), but also sport zippered vents for breathability. All jackets are neck brace compatible and can be worn over slim protection.

DBX 5.0 Jacket

• Three-layer HydraDri jacket with two-way pockets/vents (Hard Shell)
• Laser-cut, Bar Tack stitching for seamless, fully-welded construction
• Breathable with waterproof rating of 20.000/20.000mm (withstands very high pressure)
• YKK AquaGuard zippers and hidden reinforced stitching
• Tailored fit for riding with or without body armor
• Three-point, fully adjustable hood with stiffened peak fits over all helmets
• Reflective printing on hood peak
• Brush guard fabric protection on shoulders and elbows
• Vents on side of jacket
• Pass pocket on left arm
• Microfiber goggle wiper
• Silk storm cuffs at wrists
• Silicone gripper on bottom hem keeps jacket in place


Leatt's shorts are also water repellent and ventilated. They have a durable, seamless seat area and a pre-curved, tailored fit with 3D- shaped, non-snagging knees for comfort when pedaling with kneepads.

DBX 5.0 Shorts

• Three-layer HydraDri all-taped shell with dirt/water repellent coating
• Breathable with waterproof rating of 20.000/20.000mm
(withstands very high pressure)
• YKK zippers and hidden reinforced stitching
• Pre-curved tailored fit with 3D shaped, non-snagging knees for comfort
when pedaling with protectors
• Soft touch 500D 3-layer, laminated material seat area that is seamless
and durable
• Brush guard reinforcement on knees
• Rear ventilation with zipper
• Waterproof thigh pockets
• Adjustable waist with soft touch waist lining with back gripper to
prevent seat drop.